Infinia 267 (221x224)

Curved shower enclosure with a fixed wall and a hinged door with a fixed part

The shower enclosure consists of two fixed walls, into one of which a hinged door has been installed. The product is well-suited for a shower corner, the outside of which has fixtures on both sides. Fixed walls can be measured according to the depth of the fixtures so that when opened, the door does not hit the fixtures.

The door opens 90 degrees to the outside and is equipped with an adjustable centring. The function of the centring is to return the door to the open and closed positions. A pair of magnet handles keeps the door tightly closed while showering.

Fixed walls are attached from the sides to the walls of the building by means of wall mountedand supported from the top edge by the brace bars installed in the corners as well as from the bottom edge by the fitting glued to the floor. There is a gap of 25 mm between the panel of the fixed walls and the floor. seal (standard part)s may be installed between the panel and the Floor, in order to prevent water from flowing under the panel. At the bottom edge of the door panel can be installed along the bottom edge of the door panel. Installation guide

Installation
Icon

12 Working days

Icon

20 year warranty

The profiles mounted to the edges of the panel are manufactured of aluminium. The white (RAL 9016) and black (RAL 9005) surface treatment options are manufactured by powder coating. Grey and bright are anodized coatings. Profiles are sandblasted before anodization, so that the surface is as smooth as possible and there will be no fingerprints. The fittings used in the product, like square foot and brace bars, are chrome plated brass alloy.

The product is manufactured of 6mm thick tempered safety panel (EN 12150). The safety panel can be treated in the factory with Cranith calcification prevention coating. The coating enables the panel to stay clean easier. Clear and smoke are smooth surfaced and transparent panels

The size of the shower enclosure is selected from the standard dimensions. The wall mountedprofiles have adjustment range of 20mm. The adjustment range can be used for levelling any tilt of the building’s walls or for extension of the widths of the sides of the shower enclosure in relation to the provided standard dimensions. The widths of one or both sides can be further extended by 34 mm via the extension profile (optional accessory). The extension profile can be grooved for example for the inlet of the surface water pipes.

Product size

Shower enclosure fixed screen (L1)

X

Shower enclosure fixed screen (A)

X

Shower enclosure hinged door (B)

X

Taking into account the adjustment ranges, the installation dimensions of the selected combination are:
- Side L1 : 665mm - 685mm
- Side L2 : 860mm - 880mm
Installation dimensions mean the location of the outermost side of the wall mountedprofile on the building wall measured from the corner of the shower area. The width of the side of the wall mountedprofile placed against the building wall is 22mm. The dimensions may deviate from the declared values if the adjustment range must be used to level the tilt of the walls. Note! The parts of the shower enclosure may also be installed in the opposite direction than presented in the layout.:

Image

Product

Product code

Price

1

Infinia 267 (221x224)

Product code

267-61-111

Price

0.00 €

2

Infinia 221 Shower enclosure fixed screen
White painted/Transparent/L1=665 x 1900

Product code

221 61 0050

Price

320.00 €

3

Infinia 214/215/224/225 Shower enclosure fixed screen
White painted/Transparent/A=217 x 1900

Product code

214 61 0022

Price

270.00 €

4

Infinia 224 Shower enclosure hinged door
White painted/Transparent/B=643 x 1900

Product code

224 61 1048

Price

270.00 €

5

Magnet handle

Product code

913 6L 0001

Price

20.00 €

6

Magnet handle

Product code

913 6L 1001

Price

20.00 €

7

TOTAL

Product code

Price

900.00 €

Taking into account the adjustment ranges, the installation dimensions of the selected combination are:
- Side L1 : 665mm - 685mm
- Side L2 : 860mm - 880mm
Installation dimensions mean the location of the outermost side of the wall mountedprofile on the building wall measured from the corner of the shower area. The width of the side of the wall mountedprofile placed against the building wall is 22mm. The dimensions may deviate from the declared values if the adjustment range must be used to level the tilt of the walls. Note! The parts of the shower enclosure may also be installed in the opposite direction than presented in the layout.:

EAN: 6418379418236