Infinia 271 (222x224)

Curved shower enclosure with hinged doors one of which has a fixed part

Shower enclosure consists of a hinged door and a fixed wall to which has been has been installed. The product is well-suited for a shower corner on the outside of which are fixtures. Fixed wall can be dimensioned according to the depth of the fixtures so that when opened, the door does not hit the fixtures. The doors can be dimensioned symmetrically or so that the doors are of different sizes. When the shower is not in use, the door can be positioned parallel to the walls of the building.

Doors rotate 90 degrees in both directions and are equipped with adjustable centrings. The function of the centring is to return the door to the open and closed positions. positions. A pair of magnet handles keeps the doors tightly closed during showering.

The shower wall and door are attached to the walls of the building from the sides by means of wall mountedprofiles. The fixed wall is supported from the top edge by the brace bar installed in the corner and from the bottom corner by the fitting glued to the floor. There will be a 25mm gap between the panel and the floor of the fixed wall. A seal (standard part) may be installed between the panel and the floor in order to prevent water from flowing under the panel. Floor seals (standard part) which limit the flow of water, can be installed along the bottom edge of the door panel. Installation guide

Installation
Icon

12 Working days

Icon

20 year warranty

The profiles mounted to the edges of the panel are manufactured of aluminium. The white (RAL 9016) and black (RAL 9005) surface treatment options are manufactured by powder coating. Grey and bright are anodized coatings. Profiles are sandblasted before anodization, so that the surface is as smooth as possible and there will be no fingerprints. The fittings used in the product, like square foot and brace bars, are chrome plated brass alloy.

The product is manufactured of 6mm thick tempered safety panel (EN 12150). The safety panel can be treated in the factory with Cranith calcification prevention coating. The coating enables the panel to stay clean easier. Clear and smoke are smooth surfaced and transparent panels

The size of the shower enclosure is selected from the standard dimensions. The adjustment range of the wall mountedprofile of the fixed part is 20mm and that of the door, 15mm respectively. The adjustment range can be used for levelling any tilt of the building’s walls or for extending the widths of the sides of the shower enclosure in relation to the provided standard dimensions. The widths of one or both sides can be further extended by 34 mm via the extension profile (optional accessory). The extension profile can be grooved, for example, for the inlet of surface water pipes.

Product size

Shower enclosure hinged door (L1)

X

Shower enclosure fixed screen (A)

X

Shower enclosure hinged door (B)

X

Taking into account the adjustment ranges, the installation dimensions of the selected combination are:
- Side L1 : 700mm - 715mm
- Side L2 : 860mm - 880mm
Installation dimensions mean the location of the outermost side of the wall mountedprofile on the building wall measured from the corner of the shower area. The width of the side of the wall mountedprofile placed against the building wall is 22mm. The dimensions may deviate from the declared values if the adjustment range must be used to level the tilt of the walls. Note! The parts of the shower enclosure may also be installed in the opposite direction than presented in the layout.:

Image

The product is supplied as standard with a 28mm high floor seal. The optional accessories are a 50mm high floor seal for shower areas where the floor tilting is higher than normal. The length of the floor seal is 1000mm and it is cut to a suitable length on site. The watertight quality of the product can be improved by installing a step profile under the door. The step profile is cut into a suitable length on the side and glued to the floor. The height of a shaped step profile is 10mm and its width is 16mm. An extension step can be placed under the glass clamp to raise it by 10mm.

Product

Product code

Price

1

Infinia 271 (222x224)

Product code

271-61-111

Price

0.00 €

2

Infinia 222 Shower enclosure hinged door
White painted/Transparent/L1=700 x 1900

Product code

222 61 0054

Price

380.00 €

3

Infinia 214/215/224/225 Shower enclosure fixed screen
White painted/Transparent/A=217 x 1900

Product code

214 61 0022

Price

270.00 €

4

Infinia 224 Shower enclosure hinged door
White painted/Transparent/B=643 x 1900

Product code

224 61 1048

Price

270.00 €

5

Magnet handle

Product code

913 6L 0001

Price

20.00 €

6

Magnet handle

Product code

913 6L 1001

Price

20.00 €

7

Infinia-campaign -25%

Product code

DISCOUNT

Price

-230.00 €

8

TOTAL

Product code

Price

730.00 €

Taking into account the adjustment ranges, the installation dimensions of the selected combination are:
- Side L1 : 700mm - 715mm
- Side L2 : 860mm - 880mm
Installation dimensions mean the location of the outermost side of the wall mountedprofile on the building wall measured from the corner of the shower area. The width of the side of the wall mountedprofile placed against the building wall is 22mm. The dimensions may deviate from the declared values if the adjustment range must be used to level the tilt of the walls. Note! The parts of the shower enclosure may also be installed in the opposite direction than presented in the layout.:

EAN: 6418379418557