PN1_open.jpg
Assembly_instructions_PN1_PT1_PP1_PS1.pdf
Pocket_doors.pdf
880_Handle.jpg
512x513_Round handle.jpg
512x513_Hex handle.jpg
678_91_Paris_Door handle.jpg
711x712_Handle.jpg
Vetro knob_black.jpg
Vetro_531 (511+512)_no handle.jpg
Pocket_door_pocket.jpg
Pocket_door_rail.jpg
Inne P1N New York
pocket door with soft closing mechanism
The pocket door consists of a sliding glass door and sliding- and maintenance rails mounted to the top of the gap, to the ceiling. The door slides inside the wall on the rail which continues into the wall fixture. A high quality sliding mechanism, as well as a floor guide fitting provides a smooth and safe door movement. The door is equipped with one soft closing mechanism which cushions the closing and gently pulls the door into it's closed position.
For pocket doors, the installation profile needs to be mounted to the ceiling prior to closing up the wall into which the door will slide. The standard installation profile requires a total gap width of at least 2000 mm, and at least 46 mm empty space between the walls. After mounting the installation rail, the wall can be closed up. Alternatively the installation can be done first, and the wall closed up after that. Wheel carriage and stoppers should be mounted to the sliding rail before mounting it to the installation rail. The sliding rail should be secured to the installation rail with screws in the doorway. The door should then be tilted and lift to place and locked after which the floor guide is slid into place and glued to the floor. Lastly mount the cover profiles.
20 Working days
20 year warranty
The white (RAL 9016), black (RAL 9005), Sand (RAL 1019) and Mocha (RAL 8025) surface treatment options are manufactured by powder coating. The fittings used in the product, are made of painted brass alloy.
The product is manufactured of 6mm thick tempered safety panel (EN 12150). Transparent, grey and brown are smooth surfaced and transparent panels. Reeded and satin panels are not fully transparent, details cannot be made out through the panel. The reeded glass is smooth on one side and textured on the other. One side of the satin panel is etched to acquire a velvety feel and the other side is smooth. When choosing a satin panel product, bear in mind that the etched surface of the panel is sensitive to scratches and stains.
The pocket door is always manufactured according to custom dimensions. When ordering, enter actual width of door gap and height of door gap. Please note, that the free passage will be approximately 160 mm smaller than the entered gap, due to the handle needing to be reachable. The mounting rail will always require at least 2000 mm width, icluding the doorway and the part inside the wall.
Product size
.:
Select handle
Product
Product code
Price
1
Inne P1N New York
Product code
P1N-61-0
Price
0.00 €
2
Inne sliding Door
White painted/Transparent=800 x 1900
Product code
768 61 0000
Price
890.00 €
3
Inne P1N/P1P/P1T Installation instructions
/=
Product code
8/25 8RRLM
Price
0.00 €
4
TOTAL
Product code
Price
890.00 €
.:
| EAN: |
|---|