Infinia 225

Curved folding shower screen with a fixed part

The shower screen consisting of a fixed part and of a hinged part hinged to it protects the space and the fixture next to the shower from splashing water. The fixed part efficiently restricts water and when the shower is not in use the folding part can be folded into the little space inside the shower area in the direction of the building wall. Due to the combination of the fixed and the folding part the shower screen can be dimensioned also in a cramped space so that the hinged part does not hit other fixture.

The folding part of the shower screen turns to both directions 90 degrees and is equipped with adjustable centring. The centring attempts to return the folding part back to the open and closed positions. The outermost panel of the folding part turns in addition the outer panel 180 degrees in relation to the inner panel of the folding part so that the panels fold against each other into the interior portion of the shower area. The profile handle along the entire height of the panel facilitates use, if necessary (optional equipment).

Shower screen is attached by its sides to the building wall with a wall mountedprofile. The fixed wall is supported from the top edge with the brace installed in the corner and from the bottom corner by the fitting glued to the floor. Between the panel of the fixed part and the floor will be a 25mm high gap. seal (standard part)s may be installed between the panel and the may be installed a seal (standard part) , so that water will not be able to under the panel. In the bottom edge of the panels of the folding part can be installed can be installed along the bottom edge of the door panel. Installation guide

Installation
Icon

12 Working days

Icon

20 year warranty

The profiles mounted to the edges of the panel are manufactured of aluminium. The white (RAL 9016) and black (RAL 9005) surface treatment options are manufactured by powder coating. Grey and bright are anodized coatings. Profiles are sandblasted before anodization, so that the surface is as smooth as possible and there will be no fingerprints. The fittings used in the product, like square foot and brace bars, are chrome plated brass alloy.

The product is manufactured of 6mm thick tempered safety panel (EN 12150). The safety panel can be treated in the factory with Cranith calcification prevention coating. The coating enables the panel to stay clean easier. Clear and smoke are smooth surfaced and transparent panels

The size of the shower screen is selected from the standard dimensions. The wall mountedprofile has 20mm of adjustment range. The adjustment range can be used for levelling any tilt of the building’s wall or for extension of the width of the shower screen in relation to the provided standard dimensions. The width can be further extended by 34 mm via the extension profile (optional accessory). The extension profile can be grooved, for example, for the inlet of the surface water pipes.

Product size

Fixed part (A)

X

Folding part (B)

X

The total width of the selected product is:
- At its narrowest: 797mm
- At its widest: 817mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building’s walls.:

Image

The product can be equipped with a profile handle along the entire height of the panel, in order to facilitate use. The profile handle increases the width of the product by 10mm. Profile handle Is installed at the factory during the manufacturing of the product and cannot be removed later on.

Product

Product code

Price

1

Infinia 225

Product code

225-61-11

Price

0.00 €

2

Infinia 214/215/224/225 Fixed part
White painted/Transparent/A=217 x 1900

Product code

214 61 0022

Price

270.00 €

3

Infinia 225 Folding part
White painted/Transparent/B=580 x 1900

Product code

225 61 1058

Price

385.00 €

4

TOTAL

Product code

Price

655.00 €

The total width of the selected product is:
- At its narrowest: 797mm
- At its widest: 817mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building’s walls.:

EAN: 6418379419516