Vetro 547 (513x514)

Shower enclosure with a folding door and a hinged door with a fixed part

Shower enclosure consists of a folding door and a fixed wall to which has been is hinged a hinged door. The product is well-suited for a shower corner next to which there are fixtures and where the doors may not have enough space to properly open to both sides. The folding door does not require space for opening in the outside of the shower area; instead, the door folds inside the shower area so that the door panels fold into a small space against the wall of the building. The fixed wall can be dimensioned according to the depth of the fixtures so that when opened, the door does not hit the fixture. The doors can be dimensioned symmetrically or so that the doors are of different sizes. When the shower is not in use, the door can be turned in the direction of the building walls.

Doors rotate 90 degrees in both directionsand are equipped with adjustable centring. The centring attempts to return the door back to the open and closed positions. In addition the outer panel of the folding door rotates 180 degrees in relation to the inner panel so that the panels fold against each other inside of the shower area. A magnet seal keeps the door tightly closed during showering.

The fixed wall and the folding door are attached to the walls of the building from the sides by means of wall mountedfittings and hinges. The fixed wall is supported from the top edge by a brace installed in the corner and from the bottom edge by a fitting glued to the floor. Between the panel of the fixed wall and the floor will be a 25mm high gap. Between the panel and the floor may be installed a seal (standard part) in order to prevent water from passing through under the panel. Floor seals (standards equipment) can be installed at the bottom edges of the door panels, which will restrict the flow of water. Installation guide

Installation
Icon

11 Working days

Icon

20 year warranty

The fittings used in the product, like square foot and brace bars, are manufactured of brass alloy. Surface treatment options are chrome plated, brass and black painted.

The product is manufactured of 8mm thick clear tempered safety panel (EN 12150). The safety panel can be treated in the factory with a Cranith calcification prevention coating. The coating enables the panel to stay clean easier.

The size of the shower enclosure can be selected from the standard dimensions or it can be manufactured custom dimensions.

Product size

Shower enclosure folding door (L1)

X

Shower enclosure fixed screen (A)

X

Shower enclosure hinged door (B)

X

The installation dimensions of the selected combination are:
- Side L1 : 705mm
- Side L2 : 703mm
Installation dimension means the location of the outermost edge of the fitting mounted to the wall on the building wall measured from the corner of the shower area. The product does not include width adjustment options, therefore wall mountedsurfaces should be as straight as possible.:

Image

The middle hinges of the folding door have handedness. When ordering, you must choose whether the folding door is to be installed to the left or the right side when viewed from outside of the shower area. Changing handedness afterwards requires changing the middle hinges initially installed in the factory with others.

Product

Product code

Price

1

Vetro 547 (513x514)

Product code

547-21-224

Price

0.00 €

2

Vetro 513 Shower enclosure folding door
Chrome plated/Transparent/L1=705 x 2000

Product code

513 21 0068

Price

780.00 €

3

Vetro 514 Shower enclosure fixed screen
Chrome plated/Transparent/A=305 x 2000

Product code

514 21 0030

Price

450.00 €

4

Vetro 514 Shower enclosure hinged door
Chrome plated/Transparent/B=398 x 2000

Product code

514 21 1038

Price

450.00 €

5

Magnet seal pair

Product code

915 2L 0002

Price

40.00 €

6

Left

Product code

961 RL MMMM

Price

0.00 €

7

TOTAL

Product code

Price

1720.00 €

The installation dimensions of the selected combination are:
- Side L1 : 705mm
- Side L2 : 703mm
Installation dimension means the location of the outermost edge of the fitting mounted to the wall on the building wall measured from the corner of the shower area. The product does not include width adjustment options, therefore wall mountedsurfaces should be as straight as possible.:

EAN: 6418379425371