Infinia 235 (214+219)
Hinged shower door with a fixed part and magnet locking
The shower screen consisting of a fixed part and of a hinged part hinged to it protects the space and the fixtures located next to the shower from splashing water. The fixed part efficiently restricts water and when the shower is not in use, the hinged part can be turned to the side. Due to the combination of the fixed and the hinged part the shower door can be dimensioned even in cramped spaces so that the hinged part does not hit other fixtures.
The hinged part of the shower door opens to the outside at 90 degrees. The door is equipped adjustable centring. The centring attempts to return the door back to the open and closed positions. The door has a profile handle along the height of the panel, which is equipped with a magnet seal that locks tightly to its counterpart when the shower is in use.
The shower door and the wall magnet are mounted to the building wall by means of wall mountedprofiles. The fixed wall is supported from the top edge with the brace installed in the corner and from the bottom corner by the fitting glued to the floor. Between the panel of the fixed part and the floor will be a 25mm high gap. seal (standard part)s may be installed between the panel and the may be installed a seal (standard part) , so that water will not be able to under the panel. In the bottom edge of the hinged part can be installed can be installed along the bottom edge of the door panel. Installation guide
19 Working days
20 year warranty
The profiles mounted to the edges of the panel are manufactured of aluminium. The white (RAL 9016) and black (RAL 9005) surface treatment options are manufactured by powder coating. Grey and bright are anodized coatings. Profiles are sandblasted before anodization, so that the surface is as smooth as possible and there will be no fingerprints. The fittings used in the product, like square foot and brace bars, are made of brass alloy and correspond with the chosen profile color. White and black profiles have white or black painted fittings, grey and bright profiles have chrome plated fittings.
The product is manufactured of 6mm thick tempered safety panel (EN 12150). The safety panel can be treated in the factory with Cranith calcification prevention coating. The coating enables the panel to stay clean easier. Clear and smoke are smooth surfaced and transparent panels Chinchilla and satin panel are not fully transparent, details cannot be made out through the panel. Chinchilla is textured on one side and smooth on the other side. One side of the satin panel is etched to acquire a velvety feel and the other side is smooth. When choosing a satin panel product, bear in mind that the etched surface of the panel is sensitive to scratches and stains.
The size of the shower door can be selected from the standard dimensions or it can be manufactured custom dimensions. The wall mountedprofiles have the total of 35mm adjustment tolerance The adjustment range can be used for levelling any tilt of the building s walls as well as for accommodating the shower door into the installation opening. For the purposes of accommodating the fitting into the opening, one or more extension profiles extension profiles (optional accessory). One extension profile extends the width of the alcove fitting by 34mm and it can be grooved for example for the inlet of the surface water pipes.
Product size
The selected combination can be installed into the opening (L1) the width of which is:
- At is narrowest: 538mm
- At its widest: 573mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building s walls. Note! The parts of the combination can also be installed in the direction opposite to the direction shown in the layout.:
The product is supplied as standard with a 28mm high floor seal. The optional accessories are a 50mm high floor seal for shower areas where the floor tilting is higher than normal. The length of the floor seal is 1000mm and it is cut to a suitable length on site. The watertight quality of the product can be improved by installing a step profile under the door. The step profile is cut into a suitable length on the side and glued to the floor. The height of a shaped step profile is 10mm and its width is 16mm. An extension step can be placed under the glass clamp to raise it by 10mm.
Product
Product code
Price
1
Infinia 235 (214+219)
Product code
235-61-13
Price
0.00 €
2
Infinia 214/215/224/225 Shower door fixed part
White painted/Transparent/A=217 x 1900
Product code
214 61 0022
Price
350.00 €
3
Infinia 214 Shower door hinged part
White painted/Transparent/B=321 x 1900
Product code
214 61 1025
Price
300.00 €
4
Magnet handle
Product code
913 6L 0003
Price
40.00 €
5
Wall magnet
Product code
219 6L 1003
Price
100.00 €
6
TOTAL
Product code
Price
790.00 €
The selected combination can be installed into the opening (L1) the width of which is:
- At is narrowest: 538mm
- At its widest: 573mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building s walls. Note! The parts of the combination can also be installed in the direction opposite to the direction shown in the layout.:
| EAN: |
|---|