Bläk 792 Paris

Hinged shower door with magnet locking

The swinging shower screen protects the space and the fixtures located next to the shower from splashing water. When the shower is not in use, the shower screen can be turned against the wall of the building.

The shower screen turns 90 degrees in both directions and is equipped with adjustable centring. The centring attempts to return the shower screen back to the open and closed positions.

The door panel is mounted to the building wall using wall mounting profile on the hinge side of the doorway and a magnet holding wall profile on the other side. Bottom seals and step profiles can be installed under the door panels to improve water retention. Installation guide

Installation
Icon

20 Working days

Icon

20 year warranty

The white (RAL 9016) and black (RAL 9005) surface treatment options are manufactured by powder coating. The fittings used in the product, like square foot and brace bars, are brass alloy painted black/white.

The product is manufactured of 6mm thick tempered safety panel (EN 12150). The safety panel can be treated in the factory with Cranith calcification prevention coating. The coating enables the panel to stay clean easier. One side of the satin panel is etched to acquire a velvety feel and the other side is smooth. When choosing a satin panel product, bear in mind that the etched surface of the panel is sensitive to scratches and stains.

The size of the shower screen can be selected from the standard dimensions or it can be manufactured custom dimensions. wall mountedprofiles have 22mm of adjustment range. The adjustment range can be used for levelling any tilt of the building’s wall or for extension of the width of the shower screen in relation to the provided standard dimensions. The width can be further extended by 34 mm via the extension profile (optional accessory). The extension profile can be grooved, for example, for the inlet of the surface water pipes.

Product size

Hinged shower door (L1)

X

The total width of the selected product is:
- At its narrowest: 749mm
- At its widest: 771mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building’s walls.:

Image

The product is supplied as standard with a 28mm high floor seal. The optional accessories are a 50mm high floor seal for shower areas where the floor tilting is higher than normal. The length of the floor seal is 1000mm and it is cut to a suitable length on site. The watertight quality of the product can be improved by installing a step profile under the door. The step profile is cut into a suitable length on the side and glued to the floor. The height of a shaped step profile is 10mm and its width is 16mm.

Product

Product code

Price

1

Bläk 792 Paris

Product code

792-61-4

Price

0.00 €

2

Bläk 712 Hinged shower door
White painted/Transparent/L1=749 x 1950

Product code

712 61 0069

Price

530.00 €

3

Magnet locking

Product code

728 9L 0004

Price

65.00 €

4

Paris -frame

Product code

703 RL 0004

Price

220.00 €

5

TOTAL

Product code

Price

815.00 €

The total width of the selected product is:
- At its narrowest: 749mm
- At its widest: 771mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building’s walls.:

EAN: