Vetro 538 (513+514)

Alcove fitting with a folding door and a hinged door with a fixed part

The alcove fixture consists of a folding door and a fixed wall into which another hinged door has been attached. The product is well-suited for a shower enclosure next to which are fixtures and where the door may not have enough space to properly open to both sides. The folding door does not require space for opening outside the shower area; instead, the door folds inside the shower area so that the door panels fold into a small space against the wall of the building. Fixed wall and doorway can be dimensioned so that the fixed wall protects the fixtures and the doorway occupies the width of the available space. The doors can be dimensioned symmetrically or so that the doors are of different sizes. When the shower is not in use the doors can be positioned parallel to the building walls.



Doors rotate 90 degrees in both directionsand are equipped with adjustable centring. The centring attempts to return the door back to the open and closed positions. In addition the outer panel of the folding door rotates 180 degrees in relation to the inner panel so that the panels fold against each other inside of the shower area. A magnet seal keeps the door tightly closed during showering.

The fixed wall and the folding door are attached to the walls of the building from the sides by means of wall mountedfittings and hinges. The fixed wall is supported from the top edge by a brace installed in the corner and from the bottom edge by a fitting glued to the floor. Between the panel of the fixed wall and the floor will be a 25mm high gap. Between the panel and the floor may be installed a seal (standard part) in order to prevent water from passing through under the panel. Floor seals (standards equipment) can be installed at the bottom edges of the door panels, which will restrict the flow of water. Installation guide

Installation
Icon

11 Working days

Icon

20 year warranty

The fittings used in the product, like square foot and brace bars, are manufactured of brass alloy. Surface treatment options are chrome plated, brass and black painted.

The product is manufactured of 8mm thick clear tempered safety panel (EN 12150). The safety panel can be treated in the factory with a Cranith calcification prevention coating. The coating enables the panel to stay clean easier.

The size of the alcove fitting can be selected from the standard sizes or it can be manufactured using custom dimensions.

Product size

Alcove folding door (A)

X

Alcove hinged door (B)

X

Alcove fixed screen (C)

X

The selected combination can be installed into the opening (L1) the width of which is: 1390mm.
The product does not include width adjustment options, therefore wall mountedsurfaces should be as straight as possible.:

Image

The middle hinges of the folding door have handedness. When ordering, you must choose whether the folding door is to be installed to the left or the right side when viewed from outside of the shower area. Changing handedness afterwards requires changing the middle hinges initially installed in the factory with others.

Product

Product code

Price

1

Vetro 538 (513+514)

Product code

538-21-242

Price

0.00 €

2

Vetro 513 Alcove folding door
Chrome plated/Transparent/A=696 x 2000

Product code

513 21 0068

Price

780.00 €

3

Vetro 514 Alcove hinged door
Chrome plated/Transparent/B=389 x 2000

Product code

514 21 1038

Price

450.00 €

4

Vetro 514 Alcove fixed screen
Chrome plated/Transparent/C=305 x 2000

Product code

514 21 0030

Price

450.00 €

5

Magnet seal pair

Product code

915 2L 0002

Price

40.00 €

6

Left

Product code

961 RL MMMM

Price

0.00 €

7

TOTAL

Product code

Price

1720.00 €

The selected combination can be installed into the opening (L1) the width of which is: 1390mm.
The product does not include width adjustment options, therefore wall mountedsurfaces should be as straight as possible.:

EAN: 6418379425104