Fenic 339 (311+312)

Alcove fitting with a fixed wall and hinged door

Alcove fixture with a door consists of a fixed wall and a hinged door. The product is well-suited for a shower enclosure with fixtures located next to it. The fixed wall and door can be dimensioned so that the fixed wall protects the fixtures and the door is of the width of the available space.

The door opens 90 degrees to the outside and is equipped with an adjustable centring. The centring tries to return the door back to the open and closed positions. A magnet seal keeps the door tightly closed during showering.

The fixed wall and door are attached to the wall of the building from the sides by means of wall mountedprofiles. The fixed wall is supported from the top edge with the brace installed in the corner and from the bottom corner with the fixture glued to the floor. There will be a 25 mm gap between the panel and the floor of the fixed wall. A seal (standard part) may be installed between the panel and the floor, in order to prevent water from flowing under the panel. In the bottom edge of the door panel which restricts the flow of water. Installation guide

Installation
Icon

12 Working days

Icon

20 year warranty

The profiles mounted to the edges of the panel are manufactured of aluminium. The white (RAL 9016) and black (RAL 9005) surface treatment options are manufactured by powder coating. Grey and bright are anodized coatings. Profiles are sandblasted before anodization, so that the surface is as smooth as possible and there will be no fingerprints. The fittings used in the product, like square foot and brace bars, are chrome plated brass alloy.

The product is manufactured from a 6mm thick clear tempered safety panel (EN 12150). The safety panel can be treated in the factory with a Cranith calcification prevention coating. The coating enables the panel to stay clean easier.

The size of the alcove fitting can be selected from the standard sizes or it can be manufactured using custom dimensions. The wall mounted profiles have the total of 35mm adjustment tolerance The adjustment tolerance can be used for levelling any tilt in the building’s walls as well as for accommodating the alcove fitting into the installation opening. For the purposes of accommodating the fitting into the opening, one or more extension profiles (optional accessory). One extension profile extends the width of the alcove fitting by 34mm and it can be grooved for example for the inlet of the surface water pipes.

Product size

Alcove fixed screen (A)

X

Alcove hinged door (B)

X

The selected combination can be installed into the opening (L1) the width of which is:
- At is narrowest: 779mm
- At its widest: 814mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building’s walls. Note! The parts of the combination can also be installed in the direction opposite to the direction shown in the layout.:

Image

Product

Product code

Price

1

Fenic 339 (311+312)

Product code

339-61-54

Price

0.00 €

2

Fenic 311 Alcove fixed screen
White painted/Transparent/A=392 x 2000

Product code

311 61 0038

Price

290.00 €

3

Fenic 312 Alcove hinged door
White painted/Transparent/B=387 x 2000

Product code

312 61 0038

Price

360.00 €

4

Magnet seal pair

Product code

929 6L 0004

Price

40.00 €

5

TOTAL

Product code

Price

690.00 €

The selected combination can be installed into the opening (L1) the width of which is:
- At is narrowest: 779mm
- At its widest: 814mm
Dimensions may deviate from the declared values if adjustment tolerance must be used to level the tilt of the building’s walls. Note! The parts of the combination can also be installed in the direction opposite to the direction shown in the layout.:

EAN: 6418379422318